A complete line of performance-proven pumps for grease, oil and other fluids.
Series 20, Series 25
and Series 40
Series 20 pumps feature 20 cubic inch displacement air motors with a 2
1/2" stroke. Series 25 offers 25 cubic inches of displacement. Both
series deliver the right performance for most general lubrication
applications. Series 40 pumps, ideal for high volume applications,
offer a 40 cubic inch displacement air motor and 4 1/2" stroke. These
pumps are available in 50:1 rations for use as grease pumps as well as
either 3:1 or 5:1 ratios for the transfer of ATF, oil, gear lube, and
other fluid lubricants. Featuring single or double-acting pump tubes,
Series 20, Series 25 and Series 40 pumps are designed for long-life,
quiet operation, and superior performance.
Transfer, Bulk Oil and Diaphragm Pumps
The same attention to quality and performance is available in a
problem-solving selection of pumps designed for your application.
Air-operated and manual pumps with 1:1 ratios as well as bulk oil
systems with 1:1, 3:1 and 5:1 ratios to meet every transfer need. Also
available, our electric Volume-Master impeller fluid transfer pumps are
used for high volume transfer.
Manual Bucket and Filler Pumps
Ideal
for applications requiring portability and economy, Lincoln manual
bucket pumps dispense lubricants with up to 5000 psi of operating
pressure. Clamp the pump to any 25-50 lb... refinery container or
select from models that include 30 or 40 lb. bulk containers. Use
filler pumps to quickly fill grease guns and oil cans used in everyday
operation.
1335 Professional Fluid Pump
Developed
to survive the harsh conditions in today's maintenance environments,
the pump operates with non-corrosive fluids such as motor oil,
transmission fluid, gear oil, engine coolant and more. The
close-tolerance pump features a telescoping pick-up tube for 16- to
55-gallon drums with standard two-inch bung openings, and a bung
opening tool is built into the pump head. The 1335's internal check
valve ensures a constant prime, and its full stroke provides 8.5 fluid
ounces. The 1335 has brass rings that will never shrink or harden over
time, and its multi-position handle allows the pump to be set for high-
or low-viscosity fluids to ease pumping effort or maximize output. Its
special front-access design simplifies filling and results in less
spillage.
Model 4482 Pump, Reel and Meter Package
Lincoln
has introduced its new Model 4482 Pump, Reel & Meter Package for
the automotive service market. Designed for use with 55-gallon drums
and bench tanks, the package contains all components required for
installation. The system efficiently dispenses natural and synthetic
oils, automatic transmission fluid, gear oil, antifreeze or hydraulic
oil.
Oil Rider Portable Tank, Pump and Meter
This
new package features the Lincoln 4475 single stroke pump for fast,
reliable transfer of natural and synthetic motor oils and other vehicle
service fluids. The rugged, dependable Lincoln 952 oval gear electronic
meter ensures long service life in the tough shop environment and the
high capacity tank services at least 25 cars between refills.
Improved Lincoln Manual Lube Products
Reduced
cost and improved performance. Lincoln’s general lubrication products
just keep getting better. Check out the newest items introduced in our
last issues of Solutions.
4475 Economical Transfer Pump
Lincoln quality at lower cost. Air-powered performance for medium to
low viscoity fluids such as motor oil, ATF, and windshied washer fluid.
Two models to choose from: with and without spigot (unit with spigot
shown is Model 4480). Unique air motor design is patent pending. Made
for oil change outlets, vehicle service professionals, agricultural
equipment, construction machinery, industrial plants, mines and mills.
Less than half the cost of most other pneumatic piston pumps.
New Diaphragm Pumps
Lincoln has introduced two new diaphragm pumps ideal for light fluid
transfer applications in industrial and automotive as well as
construction and mining environments.
